Description
The 9-30437 is an interface which can be attached directly onto the main control board of any LaserSense aspirating detector. The card plugs into the main control board inside the detector enclosure. The board enables the detector to be directly addressed and communicate with the ZP3 main control panel. Detectors are wired onto the loop using plug in terminals located on the LaserSense detector main control board. The detector and interface are easily addressed by switch settings prominently positioned on the card. The interface is recognised by the main control panel as device type HSSD and dependent upon the analogue signals received and control panel software installed, will provide the following alarm conditions – Fault, Alert, Pre-alarm, Fire. (Alert not displayed on ZP3 panel) For ZP control panels operating on software prior to version 3.07 confirmation of available signals should be obtained from Ziton sales department. Up to 127 sensing devices can be connected to each of the control panel loops.
